GI Plastek Corporate Office | Headquarters

GI Plastek merged into PSI Molded Plastics in December 2017. The name is retired.

648 Clymer Road
Marysville, OH 43040

GI Plastek Customer Service Phone Number
GI Plastek Corporate Office Phone Number

At a Glance

Websitewww.giplastek.com
Founded1973
StatusMerged into PSI Molded Plastics, December 2017
Former Home PlantWolfeboro, NH
CareersJobs & applying ↓

GI Plastek Customer Service Phone Number

Which Number Do I Need?

GI Plastek no longer operates under that name. In December 2017 it merged with two sister companies to form PSI Molded Plastics, which runs the plants today. The GI Plastek corporate office is closed, and there is no GI Plastek customer service phone number. For molding work, parts or jobs, contact PSI Molded Plastics at (603) 569-5100. GI Plastek does not publish a corporate phone number or a headquarters phone number of its own any more. Find your situation below.

Successor company, PSI Molded Plastics

PSI's own number, published on psimp.com. PSI runs the former GI Plastek plants.

PSI Molded Plastics by email

General inquiries email published on psimp.com.

Jobs at PSI plants

Online, through the successor company's site.

Back to top ↑

Corporate Office vs. Customer Service

The Corporate Office Handles

  • The former GI Plastek company (closed)
  • Historical records for the old name

Customer Service Handles

  • Custom molding, now handled by PSI Molded Plastics
  • Quotes, orders and plant jobs at PSI

Back to top ↑

GI Plastek Key Facts

Legal NameGI Plastek
BusinessCustom injection molding, structural foam, painting and EMI shielding
Main Service LineSuccessor PSI Molded Plastics at (603) 569-5100

About GI Plastek

GI Plastek was a custom injection molder known for large and medium complex molded parts. Its plants ran standard injection molding, structural foam, gas assist and gas counter pressure molding, plus painting, EMI and RFI shielding, assembly and graphics in house. Customers were medical and diagnostic equipment makers and companies in industrial, construction, material handling, water management and recreation markets.

The company's story ended as a name in 2017. GI Plastek, Precision Southeast Inc. and Plastics Solutions Inc. were sister companies owned by Gladstone Investment, and in December 2017 they announced they were becoming one company, PSI Molded Plastics. PSI still runs the Wolfeboro, New Hampshire plant that was GI Plastek's home, at 5 Wickers Drive, along with plants in Indiana and South Carolina.

This page stays up because people still search the old name. Anything current, including quotes, orders and hiring, belongs with PSI Molded Plastics.

GI Plastek History

  • 1973 GI Plastek is founded, the date plastics trade coverage ties to the company's start.
  • 2016 The company adds large-tonnage presses and a mechanized paint line for EMI and RFI shielding work.
  • 2017 GI Plastek, Precision Southeast and Plastics Solutions merge in December 2017 to form PSI Molded Plastics.

GI Plastek Leadership

  • Daniel Mills — Named to lead the combined company in the December 2017 announcement that GI Plastek, Precision Southeast and Plastics Solutions were becoming PSI Molded Plastics

GI Plastek's own executive team left with the 2017 merger. Daniel Mills was named president and CEO of the combined PSI Molded Plastics in the merger announcement, and PSI is the leadership contact today.

Services

  • Injection molding at PSI — standard, structural foam, gas assist and gas counter pressure molding, the former GI Plastek processes
  • Painting and shielding at PSI — in-house paint line with EMI and RFI shielding, priming, coating and texturing
  • Finishing at PSI — assembly, applied graphics, printing and decorating under one roof

How to File a Complaint

GI Plastek cannot take a complaint, because the company no longer exists under that name.

  1. If your issue is about a current order or part, contact PSI Molded Plastics at (603) 569-5100 or [email protected] and explain that the work traces to the former GI Plastek operation.
  2. Give the plant, the part or program name and the dates. PSI staff can tell you whether the work moved to PSI.
  3. For an old employment or records question, start with PSI the same way. If the matter is still open, use the outside routes below.

If GI Plastek Doesn't Resolve It

Worked through customer service and still stuck? You can take the problem outside GI Plastek:

  • New Hampshire Attorney General:: Its consumer protection bureau is the state route for a dispute with a New Hampshire business.
  • Better Business Bureau:: File against PSI Molded Plastics, the operating company, rather than the retired GI Plastek name.

Back to top ↑

Careers at GI Plastek

All hiring for the former GI Plastek plants runs through PSI Molded Plastics.

  • Jobs:: PSI posts openings and plant contacts at psimp.com. There is no GI Plastek careers phone number.
  • Wolfeboro plant:: Call PSI at (603) 569-5100 for the New Hampshire plant that was GI Plastek's home.

Back to top ↑

Pay, W-2s & Former Employees

  • Pay and W-2s:: Ask PSI Molded Plastics about records for your GI Plastek years. Start at (603) 569-5100 and give your plant and dates of employment.
  • Former employees:: PSI is the successor operation. If PSI cannot find a record, it can confirm the merger details for your file.

Back to top ↑

Employment Verification

  • Who verifies:: PSI Molded Plastics is the successor employer for verification requests tied to the merged companies.
  • No published code:: Neither GI Plastek nor PSI publishes an employer code on its public pages, so there is no code to give you here.

Back to top ↑

Specialist & Other Contacts

  • Successor company:: PSI Molded Plastics, (603) 569-5100 and [email protected], both published on psimp.com.
  • Plants:: PSI lists manufacturing in New Hampshire, Indiana and South Carolina at psimp.com.

Back to top ↑

Language & Access Help

  • Spanish:: Neither company publishes a separate Spanish-language number. Call PSI at (603) 569-5100 and ask about Spanish-language help.
  • Accessibility:: Ask PSI about access arrangements for a plant visit before you travel.

Back to top ↑

GI Plastek Map Location


GI Plastek Customer Service Number — FAQs

What is the GI Plastek phone number?

There is no GI Plastek phone number anymore. The company merged into PSI Molded Plastics in December 2017. Call PSI at (603) 569-5100, the number published on psimp.com, for the plants and work that used to sit under the GI Plastek name.

Is GI Plastek still in business?

Not under that name. GI Plastek, Precision Southeast Inc. and Plastics Solutions Inc. announced in December 2017 that they were becoming PSI Molded Plastics, a single company owned by Gladstone Investment. The plants kept running, including Wolfeboro, New Hampshire, under the PSI name.

Where was the GI Plastek headquarters?

The GI Plastek headquarters address was 5 Wickers Drive, Wolfeboro Falls, NH 03894, its New Hampshire molding plant and office. The snapshot-era Marysville, Ohio address was another plant. After the 2017 merger the Wolfeboro operation continued inside PSI Molded Plastics.

What did GI Plastek make?

Large and medium complex molded plastic parts: housings and enclosures for medical and diagnostic equipment, and parts for industrial, construction, material handling and recreation products. Its in-house work covered injection and structural foam molding, painting, EMI shielding, assembly and graphics.

How do I get a molding quote now?

Contact PSI Molded Plastics at (603) 569-5100 or [email protected], or through psimp.com. Tell them the part, material and volumes you need. PSI runs the same processes GI Plastek offered, including structural foam and gas assist molding.

How do I apply for a job at the former GI Plastek plants?

Apply through PSI Molded Plastics. Its site at psimp.com covers the New Hampshire, Indiana and South Carolina plants, and the Wolfeboro plant answers at (603) 569-5100. Searches for GI Plastek jobs land here because the old name retired in 2017.

Is GI Plastek customer service available 24 hours?

No. GI Plastek has no customer service operation, because the company merged into PSI Molded Plastics in 2017. PSI answers at (603) 569-5100 during its business hours.

How do I talk to a real person at GI Plastek?

Call PSI Molded Plastics at (603) 569-5100. PSI staff run the former GI Plastek plants and can route questions about old programs, current orders and employment records.

Does GI Plastek have a customer service email?

GI Plastek does not publish a customer service email, because the company no longer operates. The email PSI Molded Plastics publishes on its own site is [email protected], for general inquiries to the successor company.

If a number or address has changed, please report it through our contact page and we will update this listing.

Back to top ↑

Related Manufacturing & Industrial


Permanent Link




Your voice matters

Share your experience

What kind of experience are you sharing?